the present research attempts to explain dynamic pull-in instability of functionally graded micro-cantilevers actuated by step dc voltage while the fringing-field effect is taken into account in the vibrational equation of motion. by employing modern asymptotic approach namely homotopy perturbation method with an auxiliary term, high-order frequency-amplitude relation is obtained, then the infl...

In this research, a functionally graded microbeam bonded with piezoelectric layers is analyzed under electric force. Static and dynamic instability due to the electric actuation is studied because of its importance in micro electro mechanical systems, especially in micro switches. In order to prevent pull-in instability, two piezoelectric layers are used as sensor and actuator. A current amplif...

In the present work the pull-in voltage of a micro cracked cantilever beam subjected to nonlinear electrostatic pressure was studied. Two mathematical models were employed for modeling the problem: a lumped mass model and a classical beam model. The effect of crack in the lumped mass model is the reduction of the effective stiffness of the beam and in the beam model; the crack is modeled as a m...

In this paper, the effect of the crack on dynamic behavior of cracked micro-beam in the presence of DC and AC loads are investigated. By applying the residual axial stress and fringing field stress, a nonlinear analytical model of cracked micro-beam is presented and crack is modeled by a massless rotational spring. The governing equation of the system is solved using Galerkin procedure and shoo...

The present research attempts to explain dynamic pull-in instability of functionally graded micro-cantilevers actuated by step DC voltage while the fringing-field effect is taken into account in the vibrational equation of motion. By employing modern asymptotic approach namely Homotopy Perturbation Method with an auxiliary term, high-order frequency-amplitude relation is obtained, then the infl...

Electrostatically actuated microbeams have been studied by many researchers in the last few years. The aim of this study is to present an improved numerical analysis of the dynamic instability of a cantilever microbeam immersed in an incompressible viscous fluid. The finite element method is used for solving the vibrational equation of the microbeam and the potential functions of the fluids in ...

gyroscopes are used as rotation rate sensors. conventional gyroscopes are heavy and bulky, which creates important problems regarding their usage in different applications. micro-gyroscopes have solved these problems due to their small size. the beam micro-gyroscope is one of the popular types of inertial sensors. their small dimensions and low energy consumption are key reasons for their popul...

This paper investigates the fault detection of a micro parallel plate capacitor subjected to nonlinear electrostatic force. For this end Thau observer, which has good ability in fault detection of nonlinear system has been presented and governing nonlinear dynamic equation of the capacitor has been presented. Upper and lower threshold for fault detection have been obtained. The robustness of th...

the static pull-in instability of beam-type micro-electromechanical systems is theoretically investigated. two engineering cases including cantilever and double cantilever micro-beam are considered. considering the mid-plane stretching as the source of the nonlinearity in the beam behavior, a nonlinear size-dependent euler-bernoulli beam model is used based on a modified couple stress theory, c...

Accurate determination of the pull-in, or the collapse voltage is critical in the design process. In this paper an analytical method is presented that provides a more accurate determination of the pull-in voltage for MEMS capacitive devices with clamped square diaphragm. The method incorporates both the linearized modle of the electrostatic force and the nonlinear deflection model of a clamped ...